Floor Signage FAQs

1. How long is the product going to last?

2. Does the product really work outside?

Yes…that was the original purpose of these signs.In response to demand, we adapted them for use inside plants and warehouses. Not only does the sign weather well, it can be stuck down on rough surfaces – even concrete walls – and stick until you’re ready to remove them. They also work well in heavy-traffic areas - many are used in stadiums where thousands walk over them every week. And they can be scrubbed without affecting the sign’s lifespan.

3. How easy are they to remove?

Even though they stick tight, there is a simple technique for removing them.Use a putty knife or similar blade to pry up one corner of the sign, then pull it up. It will take some force, but since the sign has an aluminum back, it will not tear or shred during removal. Better yet, the adhesive comes up with the sign…no sticky spots to clean and no discoloring residue.

4. Can kids vandalize or destroy the product?

Determined kids can vandalize rocks and concrete, but we make it pretty hard for them to damage our signs.  They won’t tear or shred easily, and you need the right tools and some patience to remove them.  The floor signs are hard to mark up and easy to clean.

5. Are these stock products, or can I get them customized?

Right now, every sign is made to order. (That’s because everyone wants something at least slightly different from everyone else.)The good news is that there is no penalty for custom work.

Your order can be stock or custom shapes in any size up to 42” by 96” – we’ve printed and cut to shape a Dallas Cowboy helmet and the Florida State University “Seminole” logo. And – while we have stock colors - you can have your company color on the signage…just give us your PMS colors. Better yet, if you want different words – or even your logo – we can do that, too. At no extra cost.

6. Speaking of the Cowboys, can I buy one of those helmet-shaped floor signs?

Unfortunately, no. We get a lot of requests for signs that feature registered trademarks, but we can’t print them without permission. Talk to your team about ordering them for resale.

7. What if I want each sign to be worded differently.

No problem…and no extra cost or time. Each production run is based on the size of our substrate sheets:the smallest is about ten square feet. That’s how we can create dozens of warehouse signs – each with a different “address” on it – and not require custom pricing.

8. I want our company logo on the signs. How much extra does that cost?

Nothing extra. Each order is custom produced. There is a minimum order size, but almost every order we take is above that level. That means you can specify any color (not just stock), any size and shape, any graphic, and the customization is free.

9. Is there a minimum order?

Yes, but the threshold is surprisingly low. It’s based on how much of the substrate we must use in our custom printers and applicators. That amounts to about ten square feet; in terms of cost, that works out to about $250 in signage. So that’s your minimum to print, whether it’s one very big sign or a hundred little ones…you decide.

10. How long does it take to produce these signs?

Once we have final, approved art, it takes 10-14 working days to produce, plus standard shipping times. We can shorten that with expedited production and delivery, at an extra charge. If you’re in a rush, let’s talk.